If you own a PS4, there's no reason to buy a new controller just to play PC games. The process for getting your games to work with the PS4's dual-shock controller is as easy as downloading and installing the DS4Windows driver. And if you want to play games on Steam or play on a Mac, you don't even need this driver.
Feb 21, 2019 - Method 1: Connect your PS4 Controller via USB. The simplest way to connect your controller to your Windows computer is to use a micro-USB cable. 1) Plug the smaller end of your micro-USB cable into the port on the front side of your controller (below the light bar). 2) Run Driver Easy and hit the Scan Now button. Jan 29, 2019 - Sony's DualShock 4 is an excellent controller for your PC. Setting up a PlayStation controller to use on your PC may sound like dark magic, but but the. Click 'Install the DS4 Driver' to enable you to use the PS4 DualShock. Step 1: Update Drivers and.NET Framework. Connect your PlayStation 3 controller to your PC via USB, and Windows should begin installing an initial set of drivers.
How to Play Steam Games Using your PS4 Controller
Let's start with the easiest setup in PC land. Steam has updated their platform to support PS4 controllers, but it's not quite as simple as launching Steam and playing a game.
Most games should show the PlayStation button configuration correctly, but older games that don't support Steam's generic controller may show the Xbox controller buttons on-screen. The PS4 controller should still work fine.
How to Play Non-Steam PC Games Using Your PS4 Controller
While Steam has become the dominant platform for gaming on the PC, not all games support Steam and not all players use it. Fortunately, there's an alternative for using your dual-shock controller with non-Steam games. The DSWindows driver works by tricking the computer into thinking the PS4's dual shock controller is really an Xbox controller.
If you experience any problems, you may want to reboot the computer. Sometimes this may be needed for Windows to properly detect the driver and the controller.
How to Connect Your PS4 Controller Wirelessly
While it is best to get your PC set up and running with the PS4's Dual Shock Controller using the supplied USB cable, you don't have to use the cable while playing. Sony sells a rather expensive Bluetooth adapter for connecting the controller to a PC, but even this isn't necessary. It's just a way for Sony to grab a few extra bucks out of unsuspecting gamers. The PS4 controller uses the same Bluetooth technology almost every other wireless device uses, so you can skip the more expensive Sony-branded adapter and go with any cheap Bluetooth adapter you can find on Amazon.
Even the setup is the same as any other Bluetooth device.
If you use Steam, you may want to quit out of Steam when playing non-Steam games. Steam can sometimes cause problems by intercepting the Bluetooth signal. This is only a problem when playing wirelessly. If you have your controller plugged into your PC, Steam should behave.
How to Use Your PS4 Controller on Your Mac
The directions for enabling Steam on the Mac's PS4 support are nearly identical to the instructions above for doing the same on the PC except for one minor detail —instead of accessing the Steam settings by clicking the View menu option and choosing Settings, you will click the Steam menu item and choose Preferences. All other steps are the same.
But what if you aren't using Steam? Luckily, it is easier to get your Dual Shock controller up and running with a Mac than it is using a PC. If you aren't playing wirelessly, it should simply be a matter of plugging it in using the same USB cable that connects it to the PS4.
Going wireless? You can hook up the PS4 controller wirelessly by the same method you would connect any device to the Mac with Bluetooth.
The Sony PlayStation 4 Dualshock 4 is a very well made controller. It feels solid and has an excellent D-Pad. It has wireless functionality and can charge its internal battery via Micro USB.
There are a few ways to use the Dualshock 4 with the Raspberry Pi:
General Controller UsagePairing Mode
To put the controller into pairing mode, press and hold the Share button then the PS button.
After a few seconds, the light bar will strobe rapidly and brightly.
The controller is now in pairing mode.
To turn the controller off
The controller will not sleep on its own if left idle, it will remain on until the battery goes flat.
To force the controller to go to sleep, hold the PS button for 10 seconds.
![]()
Once the light bar turns off, the controller is asleep.
Shutting down your Pi will also turn the controller off.
To wake up the controller
Tap the PS button.
The light bar will turn on. The controller will automatically re-connect to anything it's already been paired to.
To charge the controller
Connect the controller to any USB host (Raspberry Pi, powered USB hub, television USB port) or any USB charger (phone/tablet charger, USB battery, official or aftermarket controller charging station).
The light bar will pulse yellow while charging, and turn off when fully charged.
The Dualshock 4 can charge off either a USB host or a USB charger. It does not need to be connected to a USB host like the Dualshock 3 did.
Usage MethodsUSB Cable
Just plug the USB-A into the Raspberry Pi and the Micro USB into the controller. Done.
The light bar will glow dull blue when the controller is in use as a USB device this way.
If you are concerned about power usage, charging the Dualshock battery can use up to 500mA of power.
Sony Dualshock USB Wireless Adapter
This add-on product made by Sony does the Bluetooth pairing in hardware. To the Raspberry Pi and RetroPie, the controller appears as a regular wired USB controller and no additional software setup is required.
One adapter can pair one controller, though multiple adapters can be plugged into the one Pi to allow use of multiple controllers.
To pair the controllers:
Dbz bt3 beerus mod iso download. Repeat with additional adapters and controllers as required.
How To Set Up Playstation 4 Controller Driver On Computer ScreenRegular Bluetooth Pairing
Not all PS4 controllers can be used this way!!!
Try yours and see how it goes. If it doesn't work, then proceed to the next heading about
ds4drv .
How To Set Up Playstation 4 Controller Driver On Computer Download
Once paired, see if EmulationStation will recognise the controller.
If EmulationStation does respond to button presses, lucky you, you're done.
If EmulationStation doesn't respond to button presses, then your controller cannot be used this way. Unpair it and use the
ds4drv method.
The reason why all controllers don't work like this is not clear but controller firmware is suspected to be the reason - with 'old' firmware able to be used as a regular Bluetooth controller and 'new' firmware not able to be used this way - however it may also be some other non-obvious reason.
If firmware is the reason, it's likely that System Software 3.50 (April 6th 2016) is the changeover, although it may be an even earlier update.
Userspace Controller Driver (ds4drv)ds4drv is a userspace driver which allows the Dualshock 4 to be used when regular Bluetooth does not work.
The source code and further description is available at:
Which Bluetooth Adapter To Use
Installation
Install the Python 3 requirements, and then install
ds4drv with the Python package manager:
Allow non-root users to control the
ds4drv joystick:
Test the controller to see if it can connect:
(Note: the
--led 000008 can be omitted or changed to modify the controller light bar color)
Put the controller into pairing mode with Share and PS. It should connect to
ds4drv within a few seconds.
Once you have confirmed the controller connects, exit
ds4drv with Ctrl+c, the controller will disconnect.
(Note: Some controllers will require ds4drv but not hidraw to run. If the above command does not work, try running just
ds4drv --led 000008 instead.)
Now configure
ds4drv to run at startup by editing the rc.local file:
After the
# By default this script does nothing. line, add a new line with the contents:
(again, you can remove or change the
--led 000008 as desired)
(Note: If you had to drop the --hidraw to test the connection in the previous step, then do not include it in the rc.local file either. Just
/usr/local/bin/ds4drv --led 000008 )
The correct complete
rc.local file will look like:
Save this file and quit the text editor.
Turn the controller off by holding the PS button for 10 seconds until the light bar turns off.
Reboot the Pi:
Once RetroPie reboots and is at the EmulationStation screen saying 'No controllers are detected', put the controller into pairing mode with Share and PS. The controller should connect to the
ds4drv running in the background.
If EmulationStation does not recognise the newly-paired controller, then press F4 to quit EmulationStation and run
emulationstation to restart it, or just reboot your Pi and tap the PS button every few seconds to encourage the controller to re-connect to the ds4drv instance as soon as it runs.
Once EmulationStation recognises the controller, proceed with the usual EmulationStation input setup.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |